KPC
KPC series rail transfer carts are powered by sliding line. It conducts AC 380v directly into the electrical control system of the transfer cart to let it start, stop, go forward and backward and so on. The cart gets power from the slider of the safe sliding line which is moved by the cart’s running. The sliding line is limited by installation position. It can be between the rails on the channel. Through the automatic device to conduce the power in the channel directly to the rail cart. The operation system is low voltage 36v power. The hydraulic lifting device can be installed on the flat carts. These series flat carts are suitable to be used in bad environments, for example high temperature conditions.
Because of its simple structure, low cost and no strict requirements on the construction of the rails, it is the first choice for the assembly lines of the workshop. These series transfer carts are suitable for the environment of short running distance (< 50 m.) (165 ft.), high using frequency and low cart’s and assembly line works.
